About the Wi-miniDig

Info

The Wi-miniDig can operate in both stand alone mode (sensor data is processed before it is transmitted) as well as host mode (raw sensor data is transmitted, use a computer program to process the sensor data). The beauty of stand alone mode is that it simplifies your I-CubeX setup because you have one less software program to worry about ! Configure the Wi-miniDig with the stand alone mode editor and it will remember the settings after power down. If you need raw sensor data or if you need more sensor mapping complexity, use the Wi-miniDig in host mode in combination with a software program such as Max to process the sensor data. Last but not least, you can use the Wi-miniDig also with software that communicates with devices through a serial port (called «COM port» on a PC, usually associated with the RS232 protocol), ie. that doesn’t recognize MIDI devices. In this case you just don’t need to connect to the BlueMIDI application (unless you want to use our editor) but you can use the Bluetooth serial port facility.